Product number: 18280804
EAN-Code: 4250580442967
Delivery content: Set FA coilover struts incl. top mounts + RA coilover struts
ST XTA COILOVERS
For those who demand the absolute best
performance comes the ST XTA coilover. The full driving behaviour
of your car can be adjusted using KW damper technology along with
an adjustable aluminium uniball top mount for fine-tuning of the
camber and caster!
Performance driving in mind
ST XTA coilovers feature KW damping technology which
allows the suspension to be made either stiffer or softer depending
on the driving conditions. This damping adjustment is made on the
upper end of the chromed piston rod allowing the setup to be
changed almost instantly. If the rebound force is increased, the
car will drive with even more track stability and further reduced
bodyroll. If the rebound force is decreased, the car will feel more
comfortable when on the move. For increased performance, the ST XTA
features an aluminium adjustable topmount allowing the camber and
caster to be adjusted depending on your driving needs or vehicle
setup.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is
made via a continuous thread on the galvanized strut. This even
allows the lowering to be made even when the kit is installed by
turning the spring plate higher or lower! NOTE: The lowering of
each vehicle differs greatly with ST XTA coilovers due to the type
of construction. For example, older vehicles such as the Honda
Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers,
while newer models such as the Audi S3 (8P) can be lowered between
10-40mm due to being much lower from the factory.
KW Engineering: Exclusive for ST
suspension
The high-quality ST XTA coilover is based on the
twin-tube damping principle of low friction combined with
pressure-resistant damper housings. Manufactured directly at KW, a
mono block guide and seal package reduces the friction of the
damper as well as protecting it against corrosion and dirt. Each
galvanized strut is sealed multiple times to ensure maximum
longevity in ALL weather conditions.
- Latest damping technology for maximum longevity
- Reduced system friction for effective damping adjustment
- Individual lowering within the tested adjustment range
- Front and rear axle (when possible) with thread adjustment
- Galvanized coilover struts with additional coating for an
optimized corrosion protection
- Complete solution with adjustable spring plate, spring system and
bumpers with dust protection
- Aluminium adjustable uniball top mounts (when possible)
- Scaled camber adjustment, when possible
- Externally adjustable damping